---
title: "Next-Gen WWVB for your Wrist — T-Watch Ultra and PToB — PToB Blog"
description: "The T-Watch Ultra brings passive BLE and LoRa timing to the wrist. Could a neighborhood transmitter make sub-millisecond time ordinary for watches and sensors?"
url: "https://ptob.dev/blog/lora-wwvb-twatch-ultra/"
language: "en"
robots: "index, follow, max-image-preview:large, max-snippet:-1, max-video-preview:-1"
representations: {"application/json":"https://ptob.dev/blog/lora-wwvb-twatch-ultra/?format=json","text/markdown":"https://ptob.dev/blog/lora-wwvb-twatch-ultra/?format=markdown"}
format_description: "https://ptob.dev/agent-formats.json"
---

# Next-Gen WWVB for your Wrist

Our new T-Watch Ultra target explores a familiar idea with much finer timing. Broadcast a good clock, let every watch listen, and give the sensors the same time too.

[Jonathan Yantis](https://github.com/yantisj2/PToB/blob/main/CREDITS.md) 16 November 2026  9 min read

![A shared reference broadcasts LoRa timing to a T-Watch Ultra Solar face and nearby BLE timing to sensors. Wi-Fi is a proposed additional path.](https://ptob.dev/blog/twatch-neighborhood-time-v1.svg)

Concept architecture with an unchanged native T-Watch Solar preview. The display uses synthetic timing values. Kilometer-scale coverage is a deployment goal; Wi-Fi timing on the watch is future work.

In this post

There is something pleasing about a watch that quietly gets the time from the air. Leave it near a window, wake up, and the hands agree with the rest of the world. Radio-controlled watches have been doing that for decades. The ambition behind our new **LILYGO T-Watch Ultra target** is to bring that convenience to a much finer clock—and make the same time available to everything else nearby.

Imagine a suitable LoRa transmitter a couple of kilometers away. Your watch listens. So do the weather station, the garden sensors and the little data logger in the workshop. Indoors, compatible devices can follow PToB’s passive BLE timing streams. A single reference can serve many listeners without a separate time request from each one.

**Sub-1 ms synchronization is a practical engineering target for this architecture, with substantial room to do better.** PToB has already measured much smaller errors in specific BLE and calibrated LoRa experiments. Qualifying that performance across a real neighborhood is the next job. The T-Watch gives us a particularly enjoyable place to start: finally, a reason to check your wrist that involves oscillator drift.

**The T-Watch Ultra already achieves sub-100 ns relative timing over BLE.** So “sub-1 ms” leaves a little headroom.

## WWVB had the right idea

[NIST’s WWVB broadcast](https://ptob.dev/blog/lora-wwvb-twatch-ultra/#source-wwvb) distributes time on a 60 kHz carrier from Colorado. Consumer clocks and watches typically synchronize overnight, then keep time with their own quartz oscillators between receptions. The receiver does not need to log into a service or ask the transmitter for a personal update. A broadcast serves everyone who can receive it.

We want to carry that idea into a local, programmable network. A PToB transmitter could supply a neighborhood, campus or field installation; BLE could cover nearby rooms and equipment. The receiver would learn both the current time and how quickly its own clock runs, so it can predict forward between radio observations.

“The next WWVB” is the inspiration here. PToB uses different radios and packets, and existing WWVB watches cannot decode them. A national longwave service and a local LoRa installation also solve different coverage problems. What we want to preserve is the wonderfully simple experience: turn on a compatible clock and let it listen.

## Apple Watch makes 50 ms feel ordinary

Apple helped establish a useful expectation: a connected watch should know the time without being set by hand. Its [March 2015 launch announcement](https://ptob.dev/blog/lora-wwvb-twatch-ultra/#source-apple) specified timekeeping **within 50 milliseconds of UTC**, with a footnote requiring regular synchronization with an iPhone. That is the historical claim behind the familiar “under 50 ms” description, rather than a new measurement of today’s watches.

In his [2015 timekeeping interview](https://ptob.dev/blog/lora-wwvb-twatch-ultra/#source-apple-interview), Apple’s Kevin Lynch described GPS-backed network time servers and compensation for the delay when time passes from the phone to the watch. The general principle is straightforward: obtain a good reference, account for the transfer, and keep a stable local clock between updates. Simply setting a clock to the timestamp in a message when the app receives it would include the message’s journey and software delays.

PToB takes that last problem down toward the radio event itself. A compatible receiver timestamps an identifiable event against a local counter, associates it with the transmitter’s reference, and estimates the relationship between the two clocks. The watch face can draw later; the clock underneath still refers to the captured event. Display refresh and sensor timestamp accuracy are separate questions.

Going from 50 ms to 1 ms makes the interval **50 times smaller**. A microsecond is another thousand times shorter. Those conversions show the scale of the opportunity; they are not a matched performance comparison with Apple Watch.

## Meet the T-Watch Ultra

The [Ultra’s ESP32-S3, AMOLED and SX1262 radio](https://ptob.dev/blog/lora-wwvb-twatch-ultra/#source-lilygo) make it an appealing development watch for this experiment. Our target supports **Ultra V1 with SX1262**, with BLE preferred and passive LoRa reception running alongside it when enabled. The selected radio variant matters: the SX1280 version is not supported by this target’s sub-GHz fallback.

We have built three faces around the same clock. Digital puts time and source status up front. Instrument turns reception, lock, timing fit and reserve into analog complications. Solar follows the sun, twilight and moon, with small dials for timing quality and predicted tides. Accurate time can still have a little personality.

[![Native Digital face with segmented time, BLE source, illustrative 87 ns Sync RMS and PLL lock.](https://ptob.dev/blog/twatch-digital-v1.png)](https://ptob.dev/blog/twatch-digital-v1.png)

Digital

[![Native Instrument face with an olive analog dial and timing, signal and battery complications.](https://ptob.dev/blog/twatch-instrument-v1.png)](https://ptob.dev/blog/twatch-instrument-v1.png)

Instrument

[![Native Solar face with the sun’s daily path, twilight bands, moon phase and four corner dials.](https://ptob.dev/blog/twatch-solar-v1.png)](https://ptob.dev/blog/twatch-solar-v1.png)

Solar

Unmodified screenshots from the production renderer, using synthetic timing fixtures. The 87 ns and 58 s readings illustrate the interface; they are not measurements of watch accuracy. Open any face at its native 410 × 502 resolution.

These are real renderer outputs from the new source target we are preparing for GitHub. The watch remembers the selected face, brightness and screen timeout. Swipes switch faces; the launcher opens Settings. Solar currently uses a configured Florida location and tide station; GNSS stays off and location does not follow the wearer automatically. Our [T-Watch Ultra hardware guide](https://ptob.dev/hardware/#twatch) covers its faces, controls and timing paths.

## One transmitter, many listening clocks

The useful trick is to separate **when an event happened** from **when its description arrived**. A LoRa transmission takes time. Driver work and packet handling take time too. PToB’s two-step timing can describe an earlier physical transmission in a later authenticated message. The receiver pairs that description with its retained radio-event capture, rather than treating packet delivery as the time reference.

[![Two-step timing diagram: the source transmits event A, the watch captures A locally, and a later authenticated message describes A so the watch can map its counter to source time.](https://ptob.dev/blog/twatch-radio-events-v1.svg)](https://ptob.dev/blog/twatch-radio-events-v1.svg)

Concept sequence, not a measured waveform. The later message identifies the earlier captured event. Packet airtime and software delivery delay do not become clock offset; radio endpoint bias and propagation still need accounting.

That structure suits a broadcast. More listening devices do not require more timing replies. BLE receivers can likewise consume passive timing streams without exchanging a time request for every sample. Authentication, compatible firmware and usable event timestamps still matter; adding a Bluetooth logo to a sensor does not automatically give it a PToB clock. Some mesh roles also use separate control exchanges for admission and maintenance.

At **2 km, free-space travel time is about 6.7 µs**. That is small beside a 1 ms goal, although it matters a great deal when chasing a microsecond. The larger practical questions include the radio’s timing reference, fixed receive delays, antenna placement, interference and the watch’s changing orientation. A couple of kilometers is a useful deployment scenario to test, not a promised coverage radius around every transmitter. Regional radio settings and airtime limits also shape the installation.

## How much precision is already plausible?

Our [ESP32-S3 BLE study](https://ptob.dev/blog/lora-wwvb-twatch-ultra/#source-ble) measured **166.590 ns relative PPS RMS** in a 660-second experiment, with 657 eligible and three invalid records. That result comes from a different target and a defined observation path. It shows what careful event capture and clock discipline can achieve on this class of hardware.

The newer LoRa paper prepared for our next repository update reports **269.140 ns RMS** over all **900 future PPS observations**, after a fixed correction learned from earlier bench measurements. The largest observed error was 624 ns. This was a calibrated comparison at GNSS inputs against the delivered clock model, with a substantial fixed native-input delay accounted for in advance. It does not establish independent electrical output accuracy, portable UTC accuracy or kilometer-range performance. An earlier incomplete attempt remains separate in the paper.

Those results make a millisecond a comfortably larger engineering budget. They do not transfer automatically to the T-Watch. Its default BLE receive measurements have 500 ns bins, and each watch capture path needs its own validation. **Internal Sync RMS describes agreement with the fitted model; it cannot reveal every fixed bias shared by the observations.** The wristwatch’s absolute accuracy still needs an independent reference.

The encouraging part is that we are not asking an inexpensive crystal to become an atomic clock. We are teaching it its rate, observing it again, and keeping track of when the information is getting old.

## BLE nearby, LoRa farther away, Wi-Fi next?

BLE is attractive where a transmitter or relay is already nearby. Watches, environmental sensors and acquisition boards can share a local time base while receiving the same stream. LoRa offers a way to reach beyond that local area, potentially keeping a watch synchronized on a walk where the BLE source no longer reaches.

The current T-Watch prefers valid BLE timing and can use its separate LoRa clock when BLE is unavailable. If fresh timing disappears, **HOLD** keeps the displayed clock advancing from the last valid estimate. Its accuracy then becomes unknown; the display can continue until reboot, but that does not promise indefinite precision. A continuing clock and a qualified timing source need different labels.

[![Native T-Watch Settings screen with brightness, screen timeout and separate BLE and LoRa switches.](https://ptob.dev/blog/twatch-settings-v1.png)](https://ptob.dev/blog/twatch-settings-v1.png)

The native Settings preview. Both radios can be controlled separately. Today LoRa uses continuous reception; a lower-power listening schedule remains experimental, and battery endurance still needs field measurement.

Wi-Fi is another promising path for devices that already have it. Our separate [Wi-Fi beacon and NTP study](https://ptob.dev/blog/lora-wwvb-twatch-ultra/#source-wifi) measured calibrated input-phase RMS of 19.226 µs and 8.240 µs across two 900-PPS runs. That is encouraging evidence for further work, with its own calibration and qualification limits. **Wi-Fi timing is not implemented in this T-Watch target.** It is a direction to explore alongside BLE and LoRa, rather than a capability implied by the watch’s Wi-Fi hardware.

## The watch is only the beginning

Your appointment probably does not need a microsecond. A collection of sensors may benefit much more: aligning vibration recordings, comparing environmental events, or associating a wearable observation with a nearby instrument. Better clock agreement makes those comparisons easier, provided the device also timestamps the actual sampling event. Sensor buffering can otherwise hide the improvement.

The T-Watch makes the idea tangible. You can see the source, see the clock state, and choose a face that looks like a watch rather than a bench instrument. Around it, the same broadcast could support useful devices with no screen at all.

Our next steps are to measure the watch against an independent reference, walk real radio paths, test transitions between BLE and LoRa, and measure the battery cost. The [T-Watch target](https://github.com/yantisj2/PToB/tree/main/firmware/twatch), [build guide](https://github.com/yantisj2/PToB/blob/main/docs/twatch/build.md) and [supporting LoRa study](https://github.com/yantisj2/PToB/tree/main/papers/lora-sparse-timing) are prepared for the next PToB GitHub update. These destinations become available with that upcoming push. There is no generic watch image or public one-click installer yet.

A little transmitter, many listening clocks, and a shared time base for the neighborhood: WWVB supplied a very good idea. We would like to put its next local chapter on your wrist.

Every timestamp needs a reference.
**Which event did you capture?**

## Explore the details

[Passive BLE timing on ESP32 How hardware event timestamps let a listening device build a precise clock.](https://ptob.dev/blog/passive-ble-esp32/)[The PToB research library Measured BLE results, clock holdover and the wider timing architecture.](https://ptob.dev/research/)[T-Watch Ultra source · upcoming The watch target is prepared for the next GitHub update; this destination becomes available with that push.](https://github.com/yantisj2/PToB/tree/main/firmware/twatch)[T-Watch build guide · upcoming Board configuration, optional fine capture and application recovery, accompanying the upcoming source update.](https://github.com/yantisj2/PToB/blob/main/docs/twatch/build.md)

## Sources and further reading

Primary references for the hardware and methods discussed.

1. [Apple · Apple Watch launch announcement, March 2015](https://www.apple.com/newsroom/2015/03/09Apple-Watch-Available-in-Nine-Countries-on-April-24/)

   The historical 50 ms UTC claim and its requirement for regular iPhone synchronization.
2. [Kevin Lynch · Apple Watch timekeeping interview](https://mashable.com/2015/12/30/apple-watch-synchronized/)

   The 2015 account of GPS-backed network time servers and compensation for the phone-to-watch transfer.
3. [NIST · WWVB radio-controlled clocks](https://www.nist.gov/pml/time-and-frequency-division/what-time-it-faqs)

   The 60 kHz broadcast, overnight synchronization and quartz timekeeping between receptions.
4. [LILYGO · T-Watch Ultra hardware](https://wiki.lilygo.cc/products/t-watch-series/t-watch-ultra/)

   ESP32-S3, the 410 × 502 AMOLED and the board’s radio variants. This PToB target uses Ultra V1 with SX1262.
5. [PToB · Causal clock discipline on ESP32-S3](https://ptob.dev/research/esp32-s3-causal-clock-discipline/)

   The separate 660-second BLE experiment, its complete observation population and its qualification limits.
6. [PToB · Starlink and Wi-Fi timing study](https://ptob.dev/research/starlink-wifi-timing/)

   Calibrated Wi-Fi beacon and NTP experiments on other hardware; not a T-Watch Wi-Fi implementation.

## Cite this article

Jonathan Yantis. Next-Gen WWVB for your Wrist PToB Blog. Published 16 November 2026.

Article permalink: [https://ptob.dev/blog/lora-wwvb-twatch-ultra/](https://ptob.dev/blog/lora-wwvb-twatch-ultra/)

[Back to the blog](https://ptob.dev/blog/)[Inspect the project evidence](https://github.com/yantisj2/PToB/blob/main/evidence/README.md)

## Structured data

```json
{
  "@context": "https://schema.org",
  "@graph": [
    {
      "@type": "WebSite",
      "@id": "https://ptob.dev/#website",
      "url": "https://ptob.dev/",
      "name": "PToB",
      "alternateName": [
        "Precision Time over BLE",
        "Precision Time over Bluetooth"
      ],
      "description": "Bluetooth and USB software clocks: W12 60.3 ns relative-PPS RMS over 522/600 observations, separate 64 s sampled holdover, and CoreSE diagnostics.",
      "inLanguage": [
        "en",
        "de"
      ],
      "publisher": {
        "@id": "https://ptob.dev/#jonathan-yantis"
      }
    },
    {
      "@type": "Person",
      "@id": "https://ptob.dev/#jonathan-yantis",
      "name": "Jonathan Yantis",
      "url": "https://github.com/yantisj2/PToB/blob/main/CREDITS.md"
    },
    {
      "@type": "Project",
      "@id": "https://ptob.dev/#project",
      "name": "PToB",
      "alternateName": "Precision Time over BLE",
      "url": "https://ptob.dev/",
      "description": "An independent protocol project researching precision time transfer across Bluetooth-enabled microcontrollers and USB clients.",
      "sameAs": "https://github.com/yantisj2/PToB",
      "member": {
        "@id": "https://ptob.dev/#jonathan-yantis"
      },
      "knowsAbout": {
        "@id": "https://ptob.dev/#protocol"
      }
    },
    {
      "@type": "Thing",
      "@id": "https://ptob.dev/#protocol",
      "name": "Precision Time over BLE",
      "alternateName": "PToB",
      "description": "An experimental PTP-inspired protocol proposal for wireless clock synchronization over Bluetooth Low Energy."
    },
    {
      "@type": "WebPage",
      "@id": "https://ptob.dev/blog/lora-wwvb-twatch-ultra/#webpage",
      "url": "https://ptob.dev/blog/lora-wwvb-twatch-ultra/",
      "name": "Next-Gen WWVB for your Wrist — T-Watch Ultra and PToB — PToB Blog",
      "description": "The T-Watch Ultra brings passive BLE and LoRa timing to the wrist. Could a neighborhood transmitter make sub-millisecond time ordinary for watches and sensors?",
      "inLanguage": "en",
      "keywords": [
        "T-Watch Ultra",
        "LoRa timing",
        "WWVB",
        "Passive BLE",
        "Wearable clocks"
      ],
      "isPartOf": {
        "@id": "https://ptob.dev/#website"
      },
      "author": {
        "@id": "https://ptob.dev/#jonathan-yantis"
      },
      "about": {
        "@id": "https://ptob.dev/#protocol"
      },
      "dateModified": "2026-11-16T00:00:00.000Z",
      "image": "https://ptob.dev/blog/twatch-neighborhood-time-v1.png",
      "breadcrumb": {
        "@id": "https://ptob.dev/blog/lora-wwvb-twatch-ultra/#breadcrumbs"
      },
      "mainEntity": {
        "@id": "https://ptob.dev/blog/lora-wwvb-twatch-ultra/#article"
      }
    },
    {
      "@type": "BreadcrumbList",
      "@id": "https://ptob.dev/blog/lora-wwvb-twatch-ultra/#breadcrumbs",
      "itemListElement": [
        {
          "@type": "ListItem",
          "position": 1,
          "name": "PToB",
          "item": "https://ptob.dev/"
        },
        {
          "@type": "ListItem",
          "position": 2,
          "name": "Blog",
          "item": "https://ptob.dev/blog/"
        },
        {
          "@type": "ListItem",
          "position": 3,
          "name": "Next-Gen WWVB for your Wrist",
          "item": "https://ptob.dev/blog/lora-wwvb-twatch-ultra/"
        }
      ]
    },
    {
      "@type": "Blog",
      "@id": "https://ptob.dev/blog/#blog",
      "url": "https://ptob.dev/blog/",
      "name": "PToB Blog",
      "description": "Engineering notes on shared time, inexpensive hardware and the experiments behind PToB.",
      "inLanguage": "en",
      "publisher": {
        "@id": "https://ptob.dev/#jonathan-yantis"
      },
      "isPartOf": {
        "@id": "https://ptob.dev/#website"
      },
      "blogPost": [
        {
          "@id": "https://ptob.dev/blog/usb-frame-timing/#article"
        },
        {
          "@id": "https://ptob.dev/blog/lora-wwvb-twatch-ultra/#article"
        },
        {
          "@id": "https://ptob.dev/blog/esp32-wireless-softpll/#article"
        },
        {
          "@id": "https://ptob.dev/blog/esp32-clock-fundamentals/#article"
        },
        {
          "@id": "https://ptob.dev/blog/firmware-stability-time-mesh/#article"
        },
        {
          "@id": "https://ptob.dev/blog/lab-sensor-timing-economics/#article"
        },
        {
          "@id": "https://ptob.dev/blog/starlink-local-stratum-1-ntp/#article"
        },
        {
          "@id": "https://ptob.dev/blog/raspberry-pi-ptp-ntp-ble/#article"
        },
        {
          "@id": "https://ptob.dev/blog/gnss-resilient-time-mesh/#article"
        },
        {
          "@id": "https://ptob.dev/blog/passive-lora-channel-hopping/#article"
        },
        {
          "@id": "https://ptob.dev/blog/esp32-sub-microsecond-holdover/#article"
        },
        {
          "@id": "https://ptob.dev/blog/local-time-utc-mesh/#article"
        },
        {
          "@id": "https://ptob.dev/blog/grandmaster-failover-multi-master-ensemble/#article"
        },
        {
          "@id": "https://ptob.dev/blog/ble-clocks-indoor-navigation/#article"
        },
        {
          "@id": "https://ptob.dev/blog/passive-ble-esp32/#article"
        },
        {
          "@id": "https://ptob.dev/blog/why-utc/#article"
        },
        {
          "@id": "https://ptob.dev/blog/why-ptob/#article"
        }
      ]
    },
    {
      "@type": "BlogPosting",
      "@id": "https://ptob.dev/blog/lora-wwvb-twatch-ultra/#article",
      "url": "https://ptob.dev/blog/lora-wwvb-twatch-ultra/",
      "headline": "Next-Gen WWVB for your Wrist",
      "description": "The T-Watch Ultra brings passive BLE and LoRa timing to the wrist. Could a neighborhood transmitter make sub-millisecond time ordinary for watches and sensors?",
      "mainEntityOfPage": {
        "@id": "https://ptob.dev/blog/lora-wwvb-twatch-ultra/#webpage"
      },
      "isPartOf": {
        "@id": "https://ptob.dev/blog/#blog"
      },
      "author": {
        "@id": "https://ptob.dev/#jonathan-yantis"
      },
      "publisher": {
        "@id": "https://ptob.dev/#jonathan-yantis"
      },
      "inLanguage": "en",
      "dateCreated": "2026-11-16T00:00:00.000Z",
      "dateModified": "2026-11-16T00:00:00.000Z",
      "datePublished": "2026-11-16T00:00:00.000Z",
      "image": "https://ptob.dev/blog/twatch-neighborhood-time-v1.png",
      "articleSection": "Radio-controlled watches",
      "keywords": [
        "T-Watch Ultra",
        "LoRa timing",
        "WWVB",
        "Passive BLE",
        "Wearable clocks"
      ],
      "wordCount": 1862,
      "citation": [
        {
          "@type": "CreativeWork",
          "name": "Apple · Apple Watch launch announcement, March 2015",
          "url": "https://www.apple.com/newsroom/2015/03/09Apple-Watch-Available-in-Nine-Countries-on-April-24/"
        },
        {
          "@type": "CreativeWork",
          "name": "Kevin Lynch · Apple Watch timekeeping interview",
          "url": "https://mashable.com/2015/12/30/apple-watch-synchronized/"
        },
        {
          "@type": "CreativeWork",
          "name": "NIST · WWVB radio-controlled clocks",
          "url": "https://www.nist.gov/pml/time-and-frequency-division/what-time-it-faqs"
        },
        {
          "@type": "CreativeWork",
          "name": "LILYGO · T-Watch Ultra hardware",
          "url": "https://wiki.lilygo.cc/products/t-watch-series/t-watch-ultra/"
        },
        {
          "@type": "CreativeWork",
          "name": "PToB · Causal clock discipline on ESP32-S3",
          "url": "https://ptob.dev/research/esp32-s3-causal-clock-discipline/"
        },
        {
          "@type": "CreativeWork",
          "name": "PToB · Starlink and Wi-Fi timing study",
          "url": "https://ptob.dev/research/starlink-wifi-timing/"
        }
      ],
      "about": {
        "@id": "https://ptob.dev/#protocol"
      }
    }
  ]
}
```
